? 2000 ixys all rights reserved 1 - 1 v rsm v rrm type v v 700 600 vbo 21-06no7 900 800 vbo 21-08no7 1300 1200 vbo 21-12no7 features ? package with dcb ceramic base plate isolation voltage 3000 v~ planar passivated chips low forward voltage drop leads suitable for pc board soldering applications supplies for dc power equipment input rectifiers for pwm inverter battery dc power supplies field supply for dc motors advantages easy to mount with two screws space and weight savings improved temperature and power cycling capability small and light weight data according to iec 60747 refer to a single diode unless otherwise stated for resistive load at bridge output. ixys reserves the right to change limits, test conditions and dimensions. single phase rectifier bridge vbo 21 symbol test conditions maximum ratings i dav t c = 100c, module 21 a i fsm t vj = 45c; t = 10 ms (50 hz), sine 100 a v r = 0 t = 8.3 ms (60 hz), sine 106 a t vj = t vjm t = 10 ms (50 hz), sine 85 a v r = 0 t = 8.3 ms (60 hz), sine 90 a i 2 t t vj = 45c t = 10 ms (50 hz), sine 50 a 2 s v r = 0 t = 8.3 ms (60 hz), sine 47 a 2 s t vj = t vjm t = 10 ms (50 hz), sine 36 a 2 s v r = 0 t = 8.3 ms (60 hz), sine 33 a 2 s t vj -40...+150 c t vjm 150 c t stg -40...+125 c v isol 50/60 hz, rms t = 1 min 2500 v~ i isol 1 ma t = 1 s 3000 v~ m d mounting torque (m4) 1.5 - 2 nm 14 - 18 lb.in. weight typ. 18 g symbol test conditions characteristic values i r v r = v rrm ;t vj = 25c 0.3 ma v r = v rrm ;t vj = t vjm 5ma v f i f = 7 a; t vj = 25c 1.12 v v t0 for power-loss calculations only 0.8 v r t 40 m r thjc per diode; dc current 2.3 k/w per module 0.58 k/w r thjh per diode, dc current 2.8 k/w per module 0.7 k/w d s creeping distance on surface 11.2 mm d a creepage distance in air 9.7 mm a max. allowable acceleration 50 m/s 2 i davm = 21 a v rrm = 600-1200 v d k a n dimensions in mm (1 mm = 0.0394") 002 preliminary data
|
